Acta Metallurgica Sinica (English Letters) ›› 2004, Vol. 17 ›› Issue (3): 221-228 .
• Research Articles • Next Articles
L.P. Karjalainen, M.C. Somani and S.F. Medina
Received:
1900-01-01
Revised:
1900-01-01
Online:
2004-06-25
Published:
2009-10-10
L.P. Karjalainen, M.C. Somani , S.F. Medina. Discrepancies in the Regression Modelling of Recrystallization Rate as Using the Data from Physical Simulation Tests[J]. Acta Metallurgica Sinica (English Letters), 2004, 17(3): 221-228 .
1 C.M. Sellars, Proc. Hot Working and Forming Processes, eds. C.M. Sellars and G.J. Davis (The Metals Society, London, UK, 1980) p.3. 2 L.P. Karjalainen, Acta Metall. Sin. (Eng. Lett.) 13 (2000) 291. 3 L.P. Karjalainen, Mater. Sci. Technol. 11 (1995) 557. 4 J.S. Perttula and L.P. Karjalainen, Mater.Sci. Technol. 14 (1998) 626. 5 L.P. Karjalainen, M.C. Somani, D.A. Porter and M. Oldenburg, Proc. Int. Conf on High Technologies in Advanced Metal Science and Engineering, ed. G. Kodjaspirov (St. Petersburg, Russia, 2001) p.72. 6 L.P. Karjalainen, M.C. Somani, D.A. Porter and R.A. Morgridge, Proc. 5th Intern. ESAFORM Conf.,eds. M. Pietrzyk, Z. Mitura and J. Kaczmar (Publ. House Akapit, Krakow, Poland, 2002) p.603. 7 S.F. Medina and J.E. Mancilla, ISIJ Intern. 36 (1996) 1070. 8 B. Dutta and C.M. Sellars, Mater. Sci. Technol. 3 (1987) 197. 9 P.D. Hodgson and R.K. Gibbs, ISIJ Intern. 32(1992) 1329. 10 A.I. Fernandez, P. Uranga, B. Lopez and J.M. Rodriguez-Ibabe, ISIJ Intern. 4O (2000) 893. 11 S.F. Medina and A. Quispe, ISIJ Intern. 41 (2001) 774. 12 S-H. Cho, K-B. Kang and J.J. Jonas, ISIJ Intern. 41 (2001) 766. 13 W.P. Sun and E.B. Hawbolt, ISIJ Intern. 37 (1997) 1000. 14 L.P. Karjalainen, M.C. Somani, P.A. Peura and D.A. Porter, Proc. Thermomechanical Processing of Steels, ed. J.H. Beynon (The Institute of Materials, London, UK, 2000) p.130. 15 R. Bartolome, D. Jorge--Badiola, J.I. Astiazaran and I. Gutierrez, Mater. Sci. Eng. A344 (2003) 340. 16 T. Gladman, The Physical Metallurgy of Microalloyed Steels (The Institute of Materials, London, UK,1997) p.81. 17 J.X. Dong, F. Siciliano Jr., J.J. Jonas, W.J. Liu and E. Essadiqi, ISIJ Intern. 40 (2000) 613. 18 Y. Saito, T. Enami and T. Tanaka, Trans. ISIJ 25 (1985) 1146. 19 C.A. Hernandez, S.F. Medina and J. Ruiz, Acta Metall. 44 (1996) 155. 20 S.F. Medina and C.A. Hernandez, Acta Metall. 44 (1996) 137. 21 A. Szczur, A. Howe, J.I. Laburu, I. Gutierrez, C. Garcia de Andres, E. Anelli, T.M. Hoogendoorn, R.Kaspar and S. van der Zwaag, ECSC Roport EUR 19879En (2001) p.333. 22 M. Bancel, Proc. Int. Symp. on Physical Simulation (TU Delft and Duffers Scientific Inc., Delft, The Netherlands, 1992) p.145. 23 K. Airaksinen, L.P. Karjalainen and D.A. Porter, Proc. the 2nd ESAFORM Conf.on Material Forming,ed. J.A. Covas (Guimaraes, Portugal, 1999) p.555. 24 G. Li, T.M. Maccagno, D.Q. Bai and J.J. Jonas, ISIJ Intern. 36 (1996) 1479. 25 C.M. Sellars, Proc. Thermomechanical Processing in Theory,Modelling & Practice, [TMP]~2, eds. B.Hutchinson, M. Andersson, G. Engberg, B. Karlsson and T. Siwecki (Stockholm, Sweden, 1997) p.35. 26 C.M. Sellars and Q. Zhu, Mater. Sci. Eng. A28O (2000) 1. 27 H.E. Vane, T. Furu and E. Nes, Proc. The 3rd Int. Conf Recrystallization and Related Phenomena,Rex '96,ed. T. R. McNelley (Monterey,USA, 1997) p.95. 28 A. Laasraoui and J.J. Jonas, Metall. Trans. 22A (1991) 1545. 29 P. Kantanen, Master Thesis, Oulu University (Oulu) (1996) (in Finnish). 30 P.D. Hodgson, D.C. Collinson and B.A. Parker, Advances in Hot Deformation Textures and Microstructures, eds. J.J. Jonas, T.R. Bieter and K.J. Bowman (The Mineral, Metals & Materials Society USA,1994) p.41. |
[1] | Ping Deng, En-Hou Han, Qunjia Peng, Chen Sun. Corrosion Behavior and Mechanism of Irradiated 304 Nuclear Grade Stainless Steel in High-Temperature Water [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(2): 174-186. |
[2] | Xiaosheng Zhou, Hao Chen, Chenxi Liu, Yongchang Liu. Residual Ferrite Control of 9Cr ODS Steels by Tailoring Reverse Austenite Transformation [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(2): 187-195. |
[3] | Yu-Wei Liu, Jian Zhang, Xiao Lu, Miao-Ran Liu, Zhen-Yao Wang. Effect of Metal Cations on Corrosion Behavior and Surface Structure of Carbon Steel in Chloride Ion Atmosphere [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1302-1310. |
[4] | Tong Zhang, Ying Han, Wen Wang, Yang Gao, Ying Song, Xu Ran. Influence of Aging Time on Microstructure and Corrosion Behavior of a Cu-Bearing 17Cr-1Si-0.5Nb Ferritic Heat-Resistant Stainless Steel [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1289-1301. |
[5] | Lu An, Yan-Tao Sun, Shan-Ping Lu, Zhen-Bo Wang. Enhanced Fatigue Property of Welded S355J2W Steel by Forming a Gradient Nanostructured Surface Layer [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1252-1258. |
[6] | Bang Dou, Hui Zhang, Jia-Hao Zhu, Ben-Qi Xu, Zi-Yi Zhou, Ji-Li Wu. Uniformly Dispersed Carbide Reinforcements in the Medium-Entropy High-Speed Steel Coatings by Wide-Band Laser Cladding [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1145-1150. |
[7] | Cong-Yu Zhang, Hao Chen, Jia-Ning Zhu, Chi Zhang, Zhi-Gang Yang. A New Kinetic Mode During the Austenite-to-Ferrite Transformation in Fe-Mn and Fe-Mn-Mo Alloys [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(7): 975-980. |
[8] | Hou-Long Liu, Ling-Ling Liu, Ming-Yu Ma, Li-Qing Chen. Influence of Finish Rolling Temperature on Microstructure and Mechanical Properties of a 19Cr1.5Mo0.5 W Ferritic Stainless Steel [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(7): 991-1000. |
[9] | Feng Shi, Ruo-Han Gao, Xian-Jun Guan, Chun-Ming Liu, Xiao-Wu Li. Application of Grain Boundary Engineering to Improve Intergranular Corrosion Resistance in a Fe–Cr–Mn–Mo–N High-Nitrogen and Nickel-Free Austenitic Stainless Steel [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(6): 789-798. |
[10] | Zheng-Rong Ye, Zhi-Chao Qiu, Zheng-Bin Wang, Yu-Gui Zheng, Ran Yi, Xiang Zhou. Can the Prior Cathodic Polarisation Treatment Remove the Air-Formed Surface Film and Is It Necessary for the Potentiodynamic Polarisation Test? [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(6): 839-845. |
[11] | Lujun Zhou, Shanwu Yang, Yi Dong, Wenhua Zhang, Jianwen Ding, Guoliang Liu, Chengjia Shang, Raja Devesh Kumar Misra. Characterization of Compactness of Rust Layers on Weathering Steels by an Adsorption/Dehydration Test of Ethanol [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(6): 846-856. |
[12] | Yongkui Li, Jianxin Lou, Hongtao Ju, Li Lin. Impact Toughness of Heat-Affected Zones of 11Cr Heat-Resistant Steels [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(6): 821-827. |
[13] | Yanyan Hong, Penglin Gao, Hongjia Li, Changsheng Zhang, Guangai Sun. Fatigue Damage Mechanism of AL6XN Austenitic Stainless Steel at High Temperatures [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(6): 799-807. |
[14] | Mingxiao Guo, Qi Yin, Miaoran Liu, Chen Pan, Zhenyao Wang. Corrosion Behavior of 304 Stainless Steel Exposed to a Simulated Salt Lake Atmosphere [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(6): 857-870. |
[15] | Ming He, Xian-Liang Li, Qing-Wei Wang, Qiang Wang, Zhi-Yuan Liu, Chong-Jun Wang. Influence Factors Analysis of Fe-C Alloy Blocking Layer in the Electromagnetic Induction-Controlled Automated Steel Teeming Technology [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(5): 671-678. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||