Experiments Design for Hardness Optimization of the Ni-Cr Alloy  Electrodeposited by Pulse Plating

doi:10.1007/s40195-013-0120-1

Acta Metallurgica Sinica (English Letters)

收稿日期:2013-03-04 修回日期:2013-05-14 出版日期:2013-10-25 发布日期:2013-09-13

Experiments Design for Hardness Optimization of the Ni-Cr Alloy Electrodeposited by Pulse Plating

I.Imanieh, E. Yousefi, A. Dolati,M.R. Mohammadi

Department of Materials Science and Engineering, Sharif University of Technology, Azadi Ave., Tehran,Iran

Received:2013-03-04 Revised:2013-05-14 Online:2013-10-25 Published:2013-09-13
Contact: I. Imanieh

摘要/Abstract

Abstract:

The hardness of the Ni-Cralloy which is electrodeposited in chloride solution, is optimized by design of experiment method (central composite design). Various parameters were evaluated in order to find significant factors in this process. Frequency, duty cycle, current density and temperature were selected as effective factors. Analyses of variance (ANOVA) were performed on the results of the designed experiments. The best model which can predict the hardness of the Ni-Cr alloy electrodeposits was found whereas the frequency and quadratic behaviour of the current density were the most significant model terms. Serious interaction of the current density with frequency and duty cycle also were found in this model. Finally the optimum conditions of the factors for obtaining the maximum hardness of the
Ni-Cr alloy were found. Ni-Cr alloy with hardness 828 HV (electrodeposited with frequency 63 Hz, current density 1800 A/m², duty cycle 75% and temperature 31℃ bath) were assessed as the optimum deposit. The deposit under the optimum condition was investigated by scanning electron microscopy (SEM), EDX analysis, polarization method and microhardness.

Key words: Ni-Cr, Electrodeposition, Hardness, Optimization

. [J]. Acta Metallurgica Sinica (English Letters), DOI: 10.1007/s40195-013-0120-1.

I.Imanieh, E. Yousefi, A. Dolati,M.R. Mohammadi. Experiments Design for Hardness Optimization of the Ni-Cr Alloy Electrodeposited by Pulse Plating[J]. Acta Metallurgica Sinica (English Letters), DOI: 10.1007/s40195-013-0120-1.

参考文献

[1]R. Mishra and R. Balasubramaniam, Corros. Sci. 46(2004) 3019.
[2]L.Y. Qin, J.S. Lian and Q. Jiang, Trans. Nonferrous Met. Soc. China 20 (2010) 82.
[3]A.M. Rashidi, Surf. Coat. Technol. 205 (2011)4117.
[4]E. Mccafferty, Corros. Sci 44 (2002) 1393.
[5]A. Galtayries, A. Machet, P. Jolivet, P. Scott, M. Foucaut, P. Combrade, P. Marcus, M. Philippe and M. Vincent, in Passivation of Metals and Semiconductors, and Properties of Thin Oxide Layers, Elsevier Science, Amsterdam, 2006, pp. 403-409.
[6]P. Gencheva and T. Tzvetkoff, Mater. Chem. Phys. 92(2005) 505.
[7]M.S. Chandrasekar and M. Pushpavanam, Electrochim. Acta 53(2008) 3313.
[8]L. Hallez, M.D. Petris-Wery, M. Assoul, M. Feki and H.F. Ayedi, J. Appl. Electrochem. 37(2007) 843.
[9]C.A. Huang, C.K. Lin and C.Y. Chen, Surf. Coat. Technol.203(2009) 3320.
[10]Y.F. Yang, Z. Gong, L. Deng, B. Luo, Y. Ma and Z. Yang,E. Vasheghani-Farahani, A. Heidarzadeh-Vazifekhoran, A.Shojaosadati, P. Karmzadeh, K.kh. Darani,Sought Univ. Technol.13 (2006) 1005.
[11]P. Lima-Neto, A.N. Correia and G.P. Da Silva, Chem. Soc.17(2006)1419.
[12]H.C. Cheng, K.Y. Hsieh and K.M. Chen, Microelectron.Reliability 51 (2011) 826.
[13]H.L. Man, S.K. Behera and H.S. Park, J. Environ. Sci.Technol. 7(2010)157.
[14]A. Tosun and M.B. Ergun, J. Chem. Technol. Biotechnol.82(2007) 11.
[15] Z. Mokhtari-Hosseini, E. Vasheghani-Farahani, A.Heidarzadeh-Vazifekhoran, A. Shojaosadati, R. Karimzadeh and K.Kh.Darani,Bioresource Technol. 100(2009) 2436.
[16] M.S. Bhatti, A.S. Reddy, R.K. Kalia and A.K. Thukral,Desalination 269 (2011) 157.
[17] B. Wahdame, D. Candusso, X. Francois, F. Harel, J.Kauffmann and G. Coquery, Int. J. Hydrogen Energy 34 (2009)967.
[18] K. Ravikumar, K. Pakshirajan, T. Swaminathan and K. Balu,J. Chem. Eng. 105 (2005) 131.
[19] M.S. Jo, E.R. Rene, S.H. Kim and H.S. Park, J. Hazard.Mater. 152 (2008) 1276.
[20] M. Poroch-Seritan, S. Gutt, Gh. Gutt, I. Cretescu, C.Cojocaru and T. Severin, Chem. Eng. Res. Design 89 (2011)136.
[21] M.S. Bhatti, D. Kapoor, R.K. Kalia, A.S. Reddy and A.K.Thukral, Desalination 274 (2011) 74.
[22] X.T. Yuan, D. Sun, H. Yu, H. Meng, Z. Fan and X. Wang,Surf. Coat. Technol. 202 (2007) 294.
[23] D.C. Montgomery, Design and Analysis of Experiments, 4^th ed., John Wiley and Sons, New York, 1997.
[24] E.R. Rene, M.S. Jo, S.H. Kim and H.S. Park, J. Environ.Sci. Technol. 4 (2007) 177.
[25] J. Antony, Design of Experiment for Engineers andScientists, Elsevier Science & Technology Books New York, 2003.
[26] R. Muralidhar, S.N.Gummadi, V.V.Dasu, T.Panda, J.Biochem. Eng { 16 (2003) 229.
[27] F. Leaman, Theory and Practice of Pulse Plating, American Electroplaters and Surface Finishers Society, 1909.
[28] C.A. Huang, C.Y. Chen, C.C. Hsua and C.S. Lin, Scr.Mater. 57(2007) 61.
[29] C.A. Huang and C.Y. Chen, Surf. Coat. Technol. 203(2009) 3320.
[30] R.G. Brereton, Applied Chemometrics for Scientists, John Wiley & Sons, Ltd, UK, 2007.

Experiments Design for Hardness Optimization of the Ni-Cr Alloy Electrodeposited by Pulse Plating

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价