Acta Metallurgica Sinica (English Letters) ›› 2019, Vol. 32 ›› Issue (1): 74-88.DOI: 10.1007/s40195-018-0805-6

所属专题： 2019年钢铁材料专辑

• • 上一篇    下一篇

  

  • 收稿日期:2018-05-11 修回日期:2018-07-01 出版日期:2019-01-10 发布日期:2019-01-18
  • 作者简介:

    Dao-Kui Xu Professor of IMR, CAS, and “Young Merit Scholar” of Corrosion Center in the Institute of Metal Research (IMR), Chinese Academy of Sciences (CAS). He achieved Ph.D. degree from IMR, CAS, in 2008, during which he obtained “Chinese Academy of Sciences-BHP Billiton” Scholarship award, “Shi Changxu” Scholarship award and “Zhu-LiYueHua” Excellent Doctorate Student Scholarship of Chinese Academy of Sciences. He worked as a Research Fellow in ARC Center of Excellence, Design of Light Metals, Department of Materials Engineering, Monash University, Australia (2008.10-2011.10). He published more than 60 peer-reviewed scientific papers, attended 20 invited lectures and holds seven patents. His papers were cited more than 1200 times. His research interests mainly include: (1) fatigue behavior and fracture toughness of light metals, such as Mg, Al and Ti alloys; (2) effects of alloying, heat treatment and thermomechanical processes on the microstructural evolution and mechanical improvement of light metals; (3) corrosion, stress corrosion cracking and corrosion fatigue behavior of lightweight alloys; and (4) design of new lightweight alloys with a good balance of properties in terms of mechanical property and corrosion resistance.

Microstructural Characteristics and Mechanical Properties of Low-Alloy, Medium-Carbon Steels After Multiple Tempering

Erfan Abbasi1,2(), Quanshun Luo1, Dave Owens2   

  1. 1.Materials and Engineering Research Institute, Sheffield Hallam University, Howard Street, Sheffield S1 1WB, UK
    2.Tyzack Machine Knives Ltd, Shepcote Lane, Sheffield S9 1TG, UK
  • Received:2018-05-11 Revised:2018-07-01 Online:2019-01-10 Published:2019-01-18
  • Contact: Abbasi Erfan
  • About author:

    Author brief introduction:Dao-Kui Xu Professor of IMR, CAS, and “Young Merit Scholar” of Corrosion Center in the Institute of Metal Research (IMR), Chinese Academy of Sciences (CAS). He achieved Ph.D. degree from IMR, CAS, in 2008, during which he obtained “Chinese Academy of Sciences-BHP Billiton” Scholarship award, “Shi Changxu” Scholarship award and “Zhu-LiYueHua” Excellent Doctorate Student Scholarship of Chinese Academy of Sciences. He worked as a Research Fellow in ARC Center of Excellence, Design of Light Metals, Department of Materials Engineering, Monash University, Australia (2008.10-2011.10). He published more than 60 peer-reviewed scientific papers, attended 20 invited lectures and holds seven patents. His papers were cited more than 1200 times. His research interests mainly include: (1) fatigue behavior and fracture toughness of light metals, such as Mg, Al and Ti alloys; (2) effects of alloying, heat treatment and thermomechanical processes on the microstructural evolution and mechanical improvement of light metals; (3) corrosion, stress corrosion cracking and corrosion fatigue behavior of lightweight alloys; and (4) design of new lightweight alloys with a good balance of properties in terms of mechanical property and corrosion resistance.

RichHTML

7

PDF (PC)

536

Abstract:

The microstructure and mechanical properties of NiCrMoV- and NiCrSi-alloyed medium-carbon steels were investigated after multiple tempering. After austenitising, the steels were hardened by oil quenching and subsequently double or triple tempered at temperatures from 250 to 500 °C. The samples were characterised using scanning electron microscopy and X-ray diffraction, while the mechanical properties were evaluated by Vickers hardness testing, V-notched Charpy impact testing and tensile testing. The results showed that the retained austenite was stable up to 400 °C and the applied multiple tempering below this temperature did not lead to a complete decomposition of retained austenite in both steels. It was also found that the microstructure, hardness and impact toughness varied mainly as a function of tempering temperature, regardless of the number of tempering stages. Moreover, the impact toughness of NiCrMoV steel was rather similar after single/triple tempering at different temperatures, while NiCrSi steel exhibited tempered martensite embrittlement after single/double tempering at 400 °C. The observed difference was mainly attributed to the effect of precipitation behaviour due to the effect of alloying additions in the studied steels.

Key words: Medium-carbon steels, Multiple tempering, Alloying addition, Mechanical properties, Retained austenite, Precipitation behaviour