Tearing Toughness of Ductile Metals

doi:10.1007/s40195-016-0371-8

金属学报英文版 ›› 2016, Vol. 29 ›› Issue (2): 150-155.DOI: 10.1007/s40195-016-0371-8

收稿日期:2015-08-18 修回日期:2015-09-25 出版日期:2016-02-08 发布日期:2016-02-20

Tearing Toughness of Ductile Metals

Cui-Hong Li, Qi-Qiang Duan, Zhe-Feng Zhang()

Shenyang National Laboratory for Materials Science,Institute of Metal Research, Chinese Academy of Sciences,Shenyang 110016, China

Received:2015-08-18 Revised:2015-09-25 Online:2016-02-08 Published:2016-02-20

摘要/Abstract

Abstract:

A new parameter, i.e., tearing toughness, was employed to characterize the mechanical properties of some ductile metals (Cu, Cu-2 wt% Be, Cu-Al alloys, and some steels) by using three-leg trousers tearing tests. The experimental results demonstrate that their tearing toughness is not a physical constant and shows a close relationship with the materials’ types and microstructures. It can be inferred that the tearing toughness of different ductile metals has their respective variation range, expectantly, and may be represented by the comprehensive mechanical properties of strength and ductility for various ductile materials.

Key words: Ductile, metals, Strength, Ductility, Tearing, toughness

. [J]. 金属学报英文版, 2016, 29(2): 150-155.

Cui-Hong Li, Qi-Qiang Duan, Zhe-Feng Zhang. Tearing Toughness of Ductile Metals[J]. Acta Metallurgica Sinica (English Letters), 2016, 29(2): 150-155.

图/表 4

Fig. 1 a Typical tearing specimen and tearing tests at different stages, b onset of tearing, c stable propagation of tearing crack, d final tearing fracture

Fig. 2 Relationship between strength and elongation of 20 steel a, Cu-2 wt% Be alloy b, cold-rolled Cu-Al alloys c, annealed Cu-Al alloys d

Fig. 3 Tearing load-displacement curves of 20 steel a, Cu b, Cu-2 wt% Be alloy c, cold-rolled and annealed Cu-Al alloys d

Fig. 4 a, b Schematic diagrams of tearing load-displacement curve, c dependence of tearing toughness on the ultimate tensile strength of different ductile materials, d schematic illustration of trade-off relationship between strength and ductility of materials

参考文献 30

[1]	W.F. Hosford,Mechanical Behavior of Materials (Cambridge University Press, Cambridge, 2005), pp. 1-69
[2]	M. Ashby, H. Schercliff, D. Cebon, Oxford, 2007)
[3]	R.Z. Valiev, Adv. Eng. Mater. 5, 296(2003)
[4]	R.E. Smallman, R.J. Bishop, Modern Physical Metallurgy and Materials Engineering, 6th edn. (Butterworth-Heinemann,Oxford, 1999), pp. 259-296
[5]	T.H. Courtney, Mechanical Behavior of Materials (McGraw-Hill Companies, New York, 2004), pp. 454-521
[6]	Y.W. Mai, B. Cotterell, Inter. J. Fract. 24, 229(1984)
[7]	Y.W. Mai, B. Cotterell, Eng. Fract. Mech. 21(1), 123(1985)
[8]	Y.W. Mai, B. Cotterell, Inter. J. Fract. 32, 105(1986)
[9]	S. Kang, N.J. Grant, Mater. Sci. Eng. 72, 155(1985)
[10]	G. Lu, H. Fan, B. Wang, Met. Mater. 4, 432(1998)
[11]	R. Mahmudi, J. Mater. Proc. Technol. 118, 316(2001)
[12]	R. Mahmudi, R. Mohammadi, P. Sepehrband, J. Mater. Proc.Technol. 147, 185(2004)
[13]	R. Mohammadi, R. Mahmudi, Int. J. Plasticity 17, 1551 (2001)
[14]	V.P. Naumenko, A.G. Atkins, Int. J. Fatigue 28, 494 (2006)
[15]	J. Hennephof, J. Mech. Phys. Solids 4, 172 (1956)
[16]	H. Vaughan, J. Ship Res. 24, 96(1980)
[17]	T.X. Yu, D.J. Zhang, Y. Zhang, Int. J. Mech. Sci. 30, 193(1988)
[18]	B. Cotterell, J.K. Reddel, Int. J. Fracture 24, 267 (1977)
[19]	C.M. Int. J. Fracture 67, 69 (1994)
[20]	C. Muscat-Fenech, J.H. Liu, A.G. Atkins, J. Mater. Proc.Technol. 32, 301(1992)
[21]	B. Che´hab, Y. Bre´chet, J.C. Glez, P.J. Jacques, Scr. Mater. 55,999(2006)
[22]	E. Hamm, P. Reis, M. Leblanc, B. Romab, E. Cerda, Nat. Mater.7, 386(2008)
[23]	H.S. Kim, J. Karger-Kocsis, Acta Mater. 52, 3123(2004)
[24]	J.S.S. Acta Mater. 51, 4929(2003)
[25]	C.H. Li, Q.Q. Duan, Z.F. Zhang, Mater. Sci. Eng. A 528, 1636 (2011)
[26]	J.C. Pang, Q.Q. Duan, S.D. Wu, S.X. Li, Z.F. Zhang, Scr. Mater.63, 1085(2010)
[27]	C.H. Li, Q.Q. Duan, S. Qu, Z.F. Zhang, Mater. Sci. Eng. A 546,68 (2012)
[28]	X.H. An, S.D. Wu, Z.F. Zhang, R.B. Figueiredo, N. Gao, T.G.Langdon, Scr. Mater. 66, 227(2012)
[29]	X.H. An, S. Qu, S.D. Wu, Z.F. Zhang, J. Mater. Res. 26, 407(2011)
[30]	S. Qu, X.H. An, H.J. Yang, C.X. Huang, G. Yang, Q.S. Zang,Z.G. Wang, S.D. Wu, Z.F. Zhang, Acta Mater. 57, 15(2009)

Tearing Toughness of Ductile Metals

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

图/表 4

参考文献 30

相关文章 0

编辑推荐

Metrics

本文评价