Acta Metallurgica Sinica (English Letters) ›› 2012, Vol. 25 ›› Issue (2): 95-101.DOI: 10.11890/1006-7191-122-95

• 研究论文 • 上一篇    下一篇

Ti-24Al-17Nb-0.5Mo合金局部变形和加工图

王永,卢斌,杨锐   

  1. 中国科学院金属研究所
  • 收稿日期:2011-09-28 修回日期:2012-01-03 出版日期:2012-04-25 发布日期:2012-04-11
  • 通讯作者: 卢斌

Local deformation and processing maps of Ti-24Al-17Nb-0.5Mo alloy

Yong WANG1,2, Bin LU1, Rui YANG1, Xiaodong HAN3,Ping REN3   

  1. 1. Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China
    2. Linyi Academy of Technology Cooperation and Application, Linyi 276001, China
    3. AVIC Shenyang Liming Aero-engine (Group) Corporation LTD, Shenyang 110043, China
  • Received:2011-09-28 Revised:2012-01-03 Online:2012-04-25 Published:2012-04-11
  • Contact: Bin LU

PDF (PC)

922

Abstract: The processing maps were used to identify the optimal forging parameters of Ti-24Al-17Nb-0.5Mo alloy by evaluating the flow data according to the DMM model. The actual local strain rate and strain distribution in the samples were obtained by finite element calculations. The local microstructures of the deformed samples were related to the local deformation parameters and correlated with the processing maps at 0.3, 0.4, 0.5 and 0.6 of logarithmic strain. Flow regimes predicted by DMM analysis were then correlated with the local microstructural observations. Five domains of efficient coefficient could be distinguished. Unstable regions were microstructurally related to shear band formation within the α2+B2 phase deformation field, and to flow localization at grain boundaries of B2 phase in the near B2 phase deformation field. Stable flow regimes were shown to be associated with dynamic globularization of the plate-like α2 in the α2+B2 phase deformation zone, and with dynamic recrystallization of B2 in the near B2 phase deformation zone.

Key words: Processing map, Local deformation, Ti-24Al-17Nb-0.5Mo alloy, Hot deformation